Zeolite rotary equipment is a type of gas used to control atmospheric pollution. In our daily lives, due to the accelerated pace of life, the air has become increasingly fierce and not very good. The same zeolite runner equipment can reduce costs in the coating industry. The zeolite rotary equipment adsorbs and processes waste gas with a certain flow rate every round, and controls the hot air flow rate into the high-temperature desorption zone to be L/L (Tl/3) of the waste gas flow rate sent into the adsorption zone of the concentration rotary, so that the VOC concentration in the hot air is 310 times that of the VOC concentration in the waste gas.

一、催化剂全部失活：使催化剂失活的毒物包括快和慢速作用毒物两大类。快作用毒物主要有P、As等，慢速作用毒物有Pb、Zn等。通常情况下，沸石转轮的催化剂失活是由于毒物与活性组分化合或熔成合金。对于快作用毒物来说，即使只有微量也能使催化剂失活。

1、 Deactivation of all catalysts: The toxins that cause catalyst deactivation include two categories: fast and slow acting toxins. Fast acting toxins mainly include P, As, etc., while slow acting toxins include Pb, Zn, etc. Usually, the deactivation of catalysts in zeolite wheels is due to the differentiation and fusion of toxins and active components or the formation of alloys. For fast acting toxins, even a small amount can deactivate the catalyst.

二、沉积覆盖活性中心：不饱和化合物的存在可导致炭沉积，此外，陶瓷粉尘、铁氧化合物及其他颗粒物堵塞活性中心后，也会影响催化剂的吸附与解吸能力，导致催化剂活性下降。

2、 Deposition covers the active center: The presence of unsaturated compounds can lead to carbon deposition. In addition, ceramic dust, ferrite, and other particulate matter blocking the active center can also affect the adsorption and desorption ability of the catalyst, leading to a decrease in catalyst activity.

三、控制催化反应：卤素和硫的化合物易与活性中心结合，但这种结合是比较松弛、可逆且暂时性的，当废气中的这类物质被去掉后，沸石转轮的催化剂活性可以恢复。

3、 Control catalytic reaction: Halogen and sulfur compounds are prone to binding with active centers, but this binding is relatively relaxed, reversible, and temporary. When these substances are removed from the exhaust gas, the catalytic activity of the zeolite runner can be restored.

在应用RTO的过程中，可以达到相应的减排作用，对刷涂布机进行全部的优化，对有用废气的浓度进行处理，减少总排量，且设备的损耗较低，可以减少资金的投入，效果较为明显。例如：在有用废气中VOCS浓度大的时候，RTO废气治理设备就会利用印刷涂布烘干箱对其进行全部的处理，在作用之后，可以生成新鲜的空气，减少对各类能源的损耗，逐渐提升工作效果，降低成本的支出，提升企业的经济效益，发挥RTO应用作用。

In the process of applying RTO, corresponding energy-saving and emission reduction effects can be achieved. The brush coating machine can be fully optimized, and the concentration of useful exhaust gas can be treated to reduce the total displacement. Moreover, the equipment loss is low, which can reduce capital investment and achieve significant energy-saving effects. For example, when the concentration of VOCS in useful waste gas is high, RTO waste gas treatment equipment will use a printing coating drying box to fully treat it. After operation, it can generate fresh air, reduce the loss of various energy sources, gradually improve work efficiency, reduce cost expenditures, improve the economic efficiency of the enterprise, and play the role of RTO application.

沸石转轮设备的主体是装有吸附剂的转轮，分为吸附区、循环区和冷却区三个区。废气由鼓风机引入吸附区，吸附有用污染物，净化后排放。然后，吸附剂旋转到再区域。在与高温空气接触的过程中，挥发性有用化合物被脱附，随循环空气流出，吸附剂被回收。回收的吸附剂被冷却区冷却，然后旋转到吸附区进行再吸附。随着转轮的旋转，吸附剂被周期性地吸附、脱附和冷却，以净化废气。转轮吸附浓缩+RTO后处理装置：用于废气的处理；特别适用于风量大、浓度低的场合，包括印刷、大型喷涂车间、家具、芯片、液晶LED行业等生产场所。

The main body of the zeolite rotary equipment is a rotary wheel equipped with adsorbent, which is divided into three zones: adsorption zone, circulation zone, and cooling zone. The exhaust gas is introduced into the adsorption zone by a blower to adsorb useful pollutants, which are then purified and discharged. Then, the adsorbent rotates to another region. During contact with high-temperature air, volatile useful compounds are desorbed, flowing out with the circulating air, and the adsorbent is recovered. The recovered adsorbent is cooled by the cooling zone and then rotated to the adsorption zone for re adsorption. As the wheel rotates, the adsorbent is periodically adsorbed, desorbed, and cooled to purify the exhaust gas. Rotary adsorption concentration+RTO post-treatment device: used for waste gas treatment; Especially suitable for occasions with high air volume and low concentration, including printing, large spraying workshops, furniture, chips, LCD LED industries and other production sites.

沸石转轮可以利用空气直接进行脱附，使用氮气进行脱附起先我们要从气体的成分来说起来，空气中含有易燃的氧气，催化燃烧室是在260摄氏度-420摄氏度之间进行高温反应的场所，如果操作不当容易引起火灾，而氮气是一种惰性气体，不易燃烧，所以使用氮气进行脱附是比较理想的选择。氮气本身是惰性气体，不参与燃烧，设备的五大稳定系统中就有氮气降温这一项稳定措施，如果脱附温度过高，就会利用氮气进行降温，确定设备的稳定运行。

Zeolite wheels can be directly desorbed using air. When using nitrogen for desorption, we need to start with the composition of the gas. The air contains flammable oxygen, and the catalytic combustion chamber is a place where high-temperature reactions occur between 260 ° C and 420 ° C. Improper operation can easily cause a fire. Nitrogen is an inert gas that is not easily combustible, so using nitrogen for desorption is an ideal choice. Nitrogen itself is an inert gas and does not participate in combustion. Among the five stable systems of the equipment, nitrogen cooling is a stabilizing measure. If the desorption temperature is too high, nitrogen will be used to cool down and ensure the stable operation of the equipment.

本文由沸石转轮＋RTO友情奉献.更多有关的知识请点击://www.cdzjbccc.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is dedicated by Zeolite Wheel+RTO Friendship. For more information, please click on: //www.cdzjbccc.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned